The Diy Way To edge Lawn Mower Blades

Mower Parts - The Diy Way To edge Lawn Mower Blades

Hello everybody. Today, I found out about Mower Parts - The Diy Way To edge Lawn Mower Blades. Which may be very helpful to me therefore you. The Diy Way To edge Lawn Mower Blades

Is your lawn mower tearing of the lawn grass blades instead of cutting it? Does your lawn look like it has been eaten by a goat, in spite of being cut by the lawn mower? Wait; do not pull your hair by the root. Help is at hand. We will teach you how to edge the lawn mower blades at minimum price and effort.

What I said. It isn't the actual final outcome that the true about Mower Parts. You look at this article for facts about anyone want to know is Mower Parts.

Mower Parts

Your hand-operated Lawn Mower - The right Walk Behinds

Tools: The tools that your will want for doing this job are

You and your time of about 2 hours or less

A bastard file of about 12" long

A small crow bar to preclude movement of rotor of lawn mower.

A worktable will be beneficial for dong the job comfortably.

Procedure: You can use the following course as a normal guide and make changes to it to suit you. Remember the course is not sacrosanct. The results are important, not the procedure.

If possible, take off the handle of lawn mower and place lawn mower on the table.

Secure it if possible in the clamps. If you do not have clamps, do not bother, get it against any block, so that the movement away from you is restricted.

Fix the crowbar in the blades so that it will not rotate

With the help of the bastard file, file the edges of blades so that they look sharp. Work at an angle of 45 degrees

When one blade is sharpened, take off the crowbar and turn the rotor to work on someone else blade. Repeat the course until all blades are sharpened.

If you have a flexible shaft polisher in your Diy workshop, you will be able to complete the work within 5 to 10 minutes per blade. Make a template of blade profile before you start your work and collate frequently. This is considerable to ensure that you do not over cut at a place.

Safety Tip For You

While sharpening the blades ensure that the stroke is not too long otherwise, you may injure yourself.

Sharpening Blades Of Power Mower

Depending upon the lawn mower the course may vary. We have included normal statements in this procedure; you would have to change the course slightly. Keep the maintenance hand-operated of lawn mower handy if you have one.

Tools required.

Siphon hose and clean container

Heavy work gloves and goggles

Double-cut (medium-rough) flat file

Lumber scrap

Socket wrench set

Rubber mallet*

Bench vise or C clamps

Rotary blade sharpener accessory

Electric drill*

Screwdriver, or 1/4-in. Rod or bolt*

Blade balancer

Replacement blade*

* Only if required

The list may look formidable, but tools are generally available with every Diy enthusiast.

Procedure:

The course is given for the simple single blade lawn mower, but the same will apply to all types of blades, whether single or double

Wear hand gloves and clean the machine and the gasoline tank from outside

Remove spark plug from the engine

Remove all the fuel from the tank of the gasoline engine. Use the siphon hose so you do not spill gasoline on floor.

Completely empty out the oil from gearbox if you have one

Invert the machine and have entrance to the blade.

Clamp the machine so it does not move and clean the blade area thoroughly

With help of a box spanner, take off the nut holding the blade. Normally the nut will be unlocked in the reverse to direction of rotation of engine. You may engage the screwdriver in the cooling fan of machine to stop rotation of engine.

If you find that you are using too much force to unlock the nut, put one or two drops of rust removing chemical, and try after 30 minutes

After you take off the blade, clamp it in the bench vise and edge it with a file or a grinder. edge only the outer 2 to 3 inches. The area to be sharpened will be known if you see the blade.

Sharpen only to the required extent. Too much sharpening is not necessary. This is not the knife. It works at the speed of the engine

After sharpening, check with your thumb. Be right not to cut thumb. If you have done sharpening before, or seen some one doing it, you will know what we mean by this.

Balance the blade with help of a small balancing tool on Vee blocks, or even on two foot rulers located side by side

Refit the blades, refill machine oil and gasoline and test the sharpness of blades on uncut part of your lawn

Safety tips:

Always use safety goggles and hand gloves when working with power tools.

Be sure to take off the spark plug before starting. Serious accidents can happen if you do not do this.

I hope you receive new knowledge about Mower Parts. Where you can offer use in your evryday life. And just remember, your reaction is passed about Mower Parts.